The Pro Control RL G3™is the latest in remote release electronics from Tri-Tronics. The Pro Control RL G3™ comes with 1 receiver and 1 transmitter (which can operate up to 10 recievers). Can be used to trigger a variety of remote-controlled bird releasers, launchers, wingers, and o...
The Pro Control RX G3™receiver is designed to be added to an existing Pro Control transmitter when you are expanding your current remote release system.
The Pro Control TX G3™transmitter is designed to replace a lost or broken transmitter from a Pro Control RL system.
MSRP:
$139.99 USD
$124.99 USD save 11%
A Zinger Winger Replacement Wiring harnesses includes a 1/8" 2-pole plug attached to 65" of 16 gauge wire and two quick connects allowing you to easily replace your broken and damaged wire harness.
$14.99 USD
Replace your broken plugs without soldering. This kit allows you to easily replace all original Zinger Winger 1/8” 2 pole plugs that fit Dogtra and Tritronics remote receivers. No soldering required. Includes 1 soldered plugs, 2 bullet connectors and instructions.
$14.99 USD
Sold as a pair (left and right) these extra heavy hinges are nichol plated and assembled with a stainless steel machine screw and lock nut for strength and durability. All hardware and instructions included to replace original Zinger Wingers hinges.
Designed to eliminate any possible hang ups of your winger pouch and misfiring of the primers. Fits all newer style Zinger Wingers that utilize the steel "Eyebolt" on the pouch.
$24.99 USD
ReceiverLok is a universal "Receiver Anchoring System" which eliminate the aggravation of securing your remote receiver to its launcher. Attach and remove the remote receiver simply and easily without tools or mechanical fasterners. Made from a tough molded plastic ReceiverLok attaches to your r...
$19.99 USD
This 6 volt solenoid replaces original Zinger Winger™ equipment. Can be used on other devices where 6 volt solenoids are used. Steel plunger is included.
$34.99 USD
This nylon storage bag is designed to extend the life of your wingers’ rubber tubing and pouch by blocking the damaging UV rays. Also keeps the more sensitive electrical components free from moisture, dirt, dust and exposure to the elements. Comes complete with shoulder straps which enables you t...
$29.99 USD
These quick release extension brackets are designed to keep the release mechanism of your zinger winger high off the ground. Useful if you train with your wingers in wet areas. These extension brackets also serve to anchor your zinger winger by driving a metal stake (not included) thru the bracke...
$39.99 USD
These 32" standard rubber kits replace the rubber tubing on Field Trialer Wingers. The black rubber is made to fit perfectly through the wingers’ pulleys for better performance.
$24.99 USD
These heavy rubber kits replace the rubber tubing on Hunt Tester Wingers. The black rubber is made to fit perfectly through the wingers’ pulleys for better performance. Please choose the model you have below.
$29.99 USD
These 25" heavy rubber kits replace the rubber tubing on Mini Zinger Wingers. The black rubber is made to fit perfectly through the wingers’ pulleys for better performance.
$24.99 USD
These 28" standard rubber kits replace the rubber tubing on ZW II Wingers. The black rubber is made to fit perfectly through the wingers’ pulleys for better performance.
$24.99 USD
The Zinger Stake is specially designed to work with our Zinger Wingers & ZingerBlinds. Perfect for hunt tests, field trials and everyday training where high gusty wind conditions may exist. Made from 3/8" cold rolled steel these stakes prevent creeping of the winger during multiple launches & hol...
$14.99 USD
This plate attaches to your Dogtra receiver which in turn attaches to any launcher you may own by using the same hole configuration as the Tritronics Pro Control. Comes complete with hole template, powder coated aluminum plate and button snaps.
This 15' foot cord allows you to move the remote receiver anywhere around the launcher. It is also designed for Tri-Tronics Pro Control RX so you can operate an extra launcher from the same receiver. (Note: Will work on both Tri-Tronics and Dogtra brand).
$14.99 USD
These "Quick Release Plunger and Grommets" replace the original equipment on your Tritronics Pro Controls and on our Dogtra Mounting Plates (2 Plungers & 2 Grommets per package).
$5.99 USD
Canada & International 
Categories
Default
Your cart
